Custom Welded Electric Gates Featuring Fully Sealed IP67 Waterproof Motors

Every automated entrance we build includes commercial-grade operator
engines and heavy-duty hinges designed specifically to move massive aluminum frames easily.

A motorized entrance barrier adds instant security and comfort to your property.

Our team installs custom driveway gates that Broward County residents rely on.
We build these automated systems for residential and commercial properties.
These gates provide absolute comfort and security, allowing access through keypads
or remote controls. We integrate advanced hardware so you never have to open
a heavy metal frame manually again.

Our Latest Vinyl & PVC Fence Project

Project Name

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

We engineer our electric swing gates with heavy-duty parts for flawless daily operation.

Before we dig, we explain every single part of your new system. Here is what we use:

Thick aluminum frames: We weld every joint with heat instead of using weak screws to create an entrance that lasts for years.
Sealed electrical boxes: We use an IP67 Rating. (This is a standard measurement proving the box completely blocks dust and survives temporary water immersion.)
Secure entry panels: We install an Access Control Keypad. (This digital interface lets you punch in a code instead of relying on remote clickers.)

Property Slope Checks

We measure your property slope. Flat ground works great for a V-Track. (This is a metal rail embedded in concrete that a sliding gate glides along.)

Heavy Frame Assembly

Our builders mount the heavy frame. We attach the Operator Motor. (This is the sealed mechanical engine that physically pulls or pushes the structure open.) If you have a steep slope, we build a Cantilever System. (This sliding design is suspended entirely off the ground by counterbalances.)

Final Electrical Testing

We test all the wiring carefully. We guarantee your automatic gate installation perfectly meets the National Electrical Code for full code compliance.

Sudden tropical storms easily destroy basic electrical housings on cheap entrance systems.

It is a total nightmare when afternoon storms roll through Broward County. The heavy rain pours down. Suddenly, your cheap factory-default box shorts out completely.

You end up soaking wet in the driveway, trying to manually push a massive frame off its track. What that means for you is endless frustration. We stop this from happening. We pre-wire and weather-seal all electronic control boards in waterproof enclosures. Your motorized entrance barriers stay completely dry inside. You stay comfortable in your car while the system does the heavy lifting. We build entrances specifically designed to survive our brutal coastal weather.

We use heavy-duty hardware that easily supports custom metal entrances.

Installing a motorized boundary requires industrial-grade parts to guarantee long-term reliability. We focus entirely on structural strength and electrical safety to protect your investment.

Here is how our assembly process works:

Heavy-duty supports: We exclusively install sealed bearing hinges. These hinges easily manage massive aluminum frames without grinding or dropping.
Weatherproof wiring: We place every control board inside a completely sealed, weatherproof enclosure rather than using standard plastic covers.
Commercial-grade engines: We calculate the exact weight of your moving barrier. Then, we install an oversized motor that never strains during operation.

You receive a secure system that opens smoothly every single time you arrive home.

A flooded circuit board causes your driveway gate to fail during severe tropical weather..

Last summer, I drove to a large property near the coast right after a massive thunderstorm. The homeowner called our office extremely frustrated. Their sliding driveway gates had died entirely during the heavy downpour. When I arrived, the poor owner was standing in the rain. They were struggling to manually push the heavy metal structure open so their spouse could park.

I opened up the main motor housing to investigate the total failure. The previous contractor used a cheap, unsealed plastic box to hold the main circuit board. Rainwater had easily pooled inside the casing, completely frying the delicate electronics. The system was totally ruined and broken.

I explained that our coastal weather requires true waterproofing, not just basic plastic covers. My crew removed the burnt engine and installed a heavy-duty commercial replacement that meets strict code compliance. We secured the new control board inside an enclosure with a strict IP67 Rating. We also upgraded the rusty wheels riding on the V-Track to ensure smooth sideways gliding. Finally, we added a sealed Access Control Keypad for easy guest entry. The new motor pulled the massive aluminum frame closed with zero issues. That family never has to step out into a thunderstorm to push their entrance open again

Even if the power grid fails completely, you will never get trapped outside.

Many property owners across Broward County worry about installing electric swing gates because of storm outages. You might think a dead grid means your car is stuck in the street. This is a valid fear with older hardware. We solve this issue completely. Every automated entrance we build includes a dedicated battery backup system. When the main power drops, the secondary battery instantly takes over. Your Operator Motor will continue to open and close smoothly. If the battery eventually drains during a multi-day outage, we also install a secure manual release key. This tool lets you disengage the drive gear instantly. You can easily push the heavy frame open by hand. Your custom driveway gates system never locks you out. You maintain total control over your property lines at all times.

Upgrade your security today by scheduling a free automated entrance property assessment.

Do not let broken sliding driveway gates ruin your daily routine. Contact our team to design your custom driveway gates Broward County solution. Our automatic gate installation experts will visit your Broward County property, measure your exact entrance, and explain your specific hardware options. Submit your project details through our online form below to receive a fast, accurate price estimate today.

Common Questions About Motorized Driveway Gates

How much does a custom driveway gate cost in Broward County?

Expect to pay between $3,000 and $8,000 for a complete system. Your final price depends on the size and style of the aluminum frame. Our local crews install heavy-duty Operator Motors that increase the total value. We provide exact estimates after measuring your entrance.

Can I finance a new automatic gate installation?

Yes, we provide flexible monthly payment plans for property owners. You can upgrade your home security immediately with zero money down. We structure these options so you can easily afford reliable motorized entrance barriers. This keeps your emergency savings completely untouched

Do I need a permit for an electric swing gate?

The municipal building department requires a permit for all electrified property entrances. Plan reviews in this area usually take up to 15 business days. We handle this entire bureaucratic process for you. Our team ensures your new system meets strict National Electrical Code standards

What warranty covers the gate motor and electronic parts?

We protect your investment with a solid one-year workmanship guarantee. If your hinges sag, we will return to fix the physical frame. The sealed IP67 Rating components also carry specific manufacturer warranties against water damage. We ensure your system runs smoothly through heavy rain

Will my automated driveway gate open during a power outage?

Every system we build includes a reliable battery backup feature. If the main grid fails, the secondary power kicks in immediately. You will never be trapped inside or locked out of your yard. We also install a manual release key for extreme emergencies.

Is a sliding driveway gate better than a swing style?

Sliding designs work perfectly for short driveways or steep upward slopes. We install a steel V-Track in the ground to guide the heavy frame smoothly. Swinging styles require more empty space to open inward or outward. We evaluate your specific terrain to recommend the safest option.